DUNCAN AVIATION will relocate its Scottsdale, Ariz., satellite avionics shop from Corporate Jets to Desert Aviation, effective March 1. The avionics shop will now occupy the facility formerly used by Aero Services and will be open 24 hours per day. Telephone number for the Scottsdale shop is (602) 922-3575.
BRITT HOSKINS was promoted to director of government business, a newly created position at FlightSafety International. An 11-year FSI veteran, Hoskins had been manager of the company's Daleville-Dothan, Ala., learning center. In his new position, Hoskins will be based in a new FSI office in Fort Worth, Tex. and will be responsible for developing new government business opportunities, enhancing current government business contracts and coordinating FSI's overall government business efforts.
RICHARD MINTZ, who has served as Federico Pena's press secretary at the Transportation Department, plans to leave DOT in mid-March for a position with the public relations firm of Ogilvy, Adams&Rinehart.
DASSAULT FALCON JET named three Garrett Aviation Services hangar locations authorized service centers: Springfield, Ill.; Houston, Texas; and, Los Angeles, Calif. Peter L. Ginocchio, senior vice president of customer support for Dassault Falcon Jet, said the designation of the new locations "is part of our plan to expand support for Falcon operators worldwide. Garrett customers can now have a full range of airframe and engine maintenance done on their Falcons at one time and in one place."
NATIONAL AIR TRANSPORTATION ASSOCIATION has joined the chorus of those opposing FAA's proposed revisions to its airmen medical standards, recommending that the entire proposal be dropped.NATA President James Coyne said the proposed standards introduce unnecessary burdens on medical certificate applicants, adding that "FAA has no evidence to support that these new requirements will, in any way, increase aviation safety." Noting that fewer than two percent of general aviation accidents involve a medical problem as a contributing factor, Coyne said "statistics clearly indica
FOKKER AIRCRAFT opened a new material support center in Atlanta, Ga., to serve its growing customer base in the U.S. The new building is situated in the Southridge Business Center near Hartsfield International Airport. It has a floor area of 35,000 square feet, 80 percent of which will be used for warehouse facilities, with the remainder reserved for offices. The facility stocks more than 30,000 different parts with a combined value of $36 million and employs 16.
The National Transportation Safety Board, labeling flight data recorders (FDRs) installed in many aircraft "inadequate," last week recommended that a wide range of aircraft now in the fleet be equipped with FDRs that record up to 24 parameters. While primarily focused on older airline equipment such as the Boeing 727 and 737 and McDonnell Douglas DC-9, the NTSB recommendations also apply to all transport category airplanes operated under Parts 121, 125 and 135 of the Federal Aviation Regulations.
TOM GRUBAUGH has joined the aircraft sales division of Piedmont Aviation, Winston-Salem, N.C., as a corporate aircraft salesman with responsibility for sales and marketing of new and used Beech and Jetstream products in Virginia and West Virginia. He will be based in Richmond, Va. Grubaugh has extensive general aviation experience, having worked for Mitsubishi, Gulfstream and Piaggio.
PERRY REBHUHN was named a senior accounts executive at Intertrade Ltd. Rebhuhn, who will be responsible for numerous airline accounts, joins Intertrade from The Memphis Group, an aviation trading/component overhaul company in Tennessee, where he was a senior trading executive. He previously held management positions at UPS and Continental. He will serve as Intertrade's team leader for larger airline inventory consignment transactions.
FLIGHTSAFETY INTERNATIONAL said the company's new Saab 340 simulator at LaGuardia Airport received FAA Level C certification, as did a new Beech C- 12D simulator at FSI's Dalveville, Ala. training center.
BRITISH AEROSPACE Model ATP airplanes (Docket No. 93-NM-217-AD; Amdt. 39- 9128 ; AD 95-02-09) - adopts a new AD requiring inspections to detect damage, overheating and proper operation of the DC connections and cooling fans in certain transformer rectifier units (TRUs), and repair or replacement, if necessary. FAA said the AD was prompted by a report of the loss of all DC electrical power, except for the battery emergency bus, due to failure of the TRUs, which occurred during flight. The AD is effective March 16.
CESSNA AIRCRAFT said it is increasing the maximum operating speed (MMO) for the Citation X business jet to Mach .92, based on more than 600 hours of flight tests, plus airframe static tests. Cessna also said certification of the Citation X has slipped slightly, from August to November, due to additional FAA requirements, but first customer deliveries are still set for spring 1996.
THE FIRST TELEVISION ADS for NATA's Learn To Fly program began running this month in Southern California, the first of four test markets for the LTF program before it goes national later this year.
DON PETERSEN was named an airframe service sales representative for Duncan Aviation, Lincoln, Neb. An airframe mechanic with the company since 1989, Petersen has held several positions, most recently as the airframe shop's resource manager. Before joining Duncan, Petersen held maintenance and management positions with Motorola Inc. Corporate Aviation in Wheeling, Ill., McDonnell Douglas in Riyadh, Saudi Arabia, Seattle Jet Center and Lake Union Air of Seattle.
Eleven of the 12 living former Federal Aviation Administration administrators support restoring FAA independence, former Administrator Najeeb Halaby told Congress last week. Halaby, testifying before the House Transportation aviation subcommittee, said all 12 former administrators support other elements of a four-point FAA reform plan: dedicating the aviation trust fund exclusively to FAA; liberalizing procurement and personnel rules, and outsourcing four activities.
JETSTREAM AIRCRAFT INC. said the first Jetstream 41 full flight simulator is now operational at the Reflectone Training Center in Sterling, Va., near Dulles International Airport. The simulator has been approved for "Level C" operations.
DOYLE GARRETT was promoted to team leader-service managers in Duncan Aviation's customer service area. He will oversee the maintenance and repair service of every airplane that comes to Duncan's facility in Lincoln, Neb. in his role supervising and directing the service managers who are the primary customer contacts. Garrett joined Duncan in 1978.
AIR TAXI OPERATORS and corporate aircraft operated on Part 135 certificates could be affected by a series of National Transportation Safety Board recommendations - primarily aimed at older airline transports - that call for expanding the number of parameters recorded on flight data recorders. See article on Page 91 of the hard copy of this issue.
RAYTHEON CORPORATE JETS Model Hawker 800 and 1000 and Model DH/BH/HS/BAe 125 Series Airplanes (Docket No. 94-NM-137-AD; Amendment 39-9107; AD 94-26- 12) - This amendment adopts a new airworthiness directive, applicable to certain Raytheon Corporate Jets Model Hawker 800 and 1000 and Model DH/BH/HS/BAe 125 series airplanes, that requires inspections to detect cracking of the sidestay jack pivots of the main landing gear, and replacement of the sidestay jack pivot assemblies with new assemblies.
NATIONAL AIR TRANSPORTATION ASSOCIATION is supporting legislation (H.R.635) introduced by Rep. Wally Herger (R-Calif.) to exempt persons traveling on an air ambulance from paying the 10 percent passenger ticket tax.
FLIGHTSAFETY INTERNATIONAL has installed a new Beech 1900D full flight simulator at its LaGuardia Airport training center in New York. The simulator will be certified to FAA "Level D" standards.
In a formal Federal Register notice that only a bureaucrat could love, FAA has declared that the new airport in Denver will be known as Denver International Airport and that it will open for business Feb. 28.
CHALLENGE AIR CARGO is building a $20 million, 165,000-square-foot air cargo facility at Miami International Airport. The fully automated facility, to be located at the northwest corner of the airport on Northwest 67th Avenue (Perimeter Road), will feature a "high-bay" section that will permit stacking cargo three tiers high. The automated cargo system is being designed and manufactured by Rapistan-Demag.