Raytheon Aircraft, which will transfer assembly of the Hawker business jets from Chester, England to its Wichita facilities by 1997, plans to retain the maintenance facility at the Chester site as a "stand-alone" service center for Hawker jets. "Our service business in the U.K., which had originally been heavily involved with internal work, has demonstrated its ability to win external revenue," said Raytheon Aircraft President Roy Norris.
BEECH Models 60 and A60 airplanes (Docket No. 95-CE-23-AD) - proposes to require incorporation of revisions into the airplane flight manual that would specify a minimum airspeed for operation in icing conditions. The proposed action is prompted by reports of several incidents and accidents involving the affected airplanes in icing conditions. The actions specified by the proposed AD are intended to prevent loss of control because the airplane is traveling too slowly in icing conditions. Comments on the proposal must be sent in triplicate before Aug.
JETSTREAM Models 3101 and 3201 airplanes (Docket No. 90-CE-67-AD; Amdt. 39- 9250; AD 95-11-17) - supersedes AD 90-13-12, which requires modifying the airplane electrical system and revising the emergency procedures section of the airplane flight manual. This action retains the requirements for airplanes that do not have modified inverters installed and the inverted transfer function restored. FAA has determined that installing modified inverters along with restoring the inverter transfer functions corrects the problems in the power supply addressed by AD 90-13-12.
A CONTENTIOUS session is anticipated next week in Las Vegas, part of a series of FAA-sponsored meetings to gather comments on the agency's effort to raise the operating standards of Part 135 air carriers to the level of Part 121 of the FARs. Portions of the controversial proposal came under fire last month at the Regional Airline Association convention in San Antonio and at a public hearing in Alaska (BA, May 22/215), where some speakers charged the new rule could actually reduce the level of safety.
JEREMY COX was appointed technical service representative for TXI Aviation, Inc. Cox, who has more than 15 years of experience in aircraft maintenance and repair, formerly was responsible for sales and marketing efforts at Avtec, a corporate aircraft modification center in Cahokia, Ill.
In the latest of a series of actions involving Robinson helicopters, the Federal Aviation Administration last week released a technical panel report on R22 and R44 helicopters that recommended design and operational changes as well as continued research to prevent future rotor/airframe contact accidents. The technical panel, comprising industry, academia, Defense Department and FAA officials, convened in July 1994 following a series of R22 and R44 rotor/airframe contact accidents.
FACING THESE RESTRICTIONS, Helicopter Association International is developing its own program to set standards for air tour operators. HAI began work in the fall on its Tour Operators Program of Safety (TOPS), which will address most aspects of operations, including management, pilot qualification, training, maintenance and equipment. In addition, the TOPS program will cover independent safety audits for operators. HAI members are expected to continue work on TOPS through the summer and officials hope to have the program finalized by the end of the year.
JETSTREAM Model 4101 airplanes (Docket No. 95-NM-74-AD; Amdt. 39-9241; AD 95-09-03) - publishes an AD that was previously sent to all known U.S. owners and operators of Jetstream Model 4101 airplanes by individual letters. This AD requires an inspection to determine the number of hours time in service on the landing gear control unit, and modification of the unit's cable. This amendment is prompted by a report of failure of a micro-switch in the landing gear control unit.
EUROCOPTER Model AS-355 E, F, F1, F2 and N helicopters (Docket No. 95-SW- 09-AD; Amdt. 39-9239; AD 95-11-05) - requires a check to ensure that the main gearbox oil pressure warning light illuminates during each shutdown of the helicopter engine until the main gearbox oil pressure switch is replaced. This amendment is prompted by a main gearbox switch malfunction. This condition could result in failure to detect a loss of oil pressure, loss of the main gearbox, loss of power to the main rotor system and subsequent loss of helicopter control.
Summary: Pursuant to FAA's rulemaking provisions governing the application, processing, and disposition of petitions for exemption (14 CFR Part 11), this notice contains a summary of certain petitions seeking relief from specified requirements of the Federal Aviation Regulations (14 CFR Chapter I), dispositions of certain petitions previously received, and corrections. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities.
AVIATION RULEMAKING ADVISORY COMMITTEE last week approved a draft notice of proposed rulemaking to allow Part 135 operators to fly certain single-engine aircraft under instrument flight rules.The committee, which developed the draft NPRM at the request of the Federal Aviation Administration, will forward its proposal to FAA for action. The proposal still must go through the normal rulemaking process, including a public comment period, before it is enacted. See article below.
Fokker Aircraft and its unions have agreed to 945 job reductions as part of the Dutch aircraft manufacturer's effort to become more competitive through restructuring, officials confirmed last week. Fokker, controlled by Daimler-Benz Aerospace of Germany, continues negotiations with its worker groups to eliminate another 615 jobs by the end of the year, making a total of 1,560 reductions this year.
FOKKER F28 Mark 0100 series airplanes (Docket No. 95-NM-38-AD) - proposes to require replacement of the return filter diaphragm assemblies on hydraulic systems 1 and 2 with modified filter units. This proposal is prompted by a report that the brake units have insufficient running clearance because of overpressure in the hydraulic return system. This condition could lead to brake over-heating.
BEECH Model 400, 400A, and MU-300-10 airplanes (Docket No. 94-NM-162-AD) - proposes to require installation of an improved adjustment mechanism on the flightcrew seats and replacement of the existing aluminum seat reinforcement assemblies with steel assemblies. This proposal is prompted by reports of incomplete latching of the existing adjustment mechanism and cracked reinforcement assemblies, which could result in sudden shifting of a flightcrew seat. The actions specified by the proposed AD are intended to prevent such shifting of a flightcrew seat.
ROBINSON HELICOPTER Model R22 series helicopters (Docket No. 95-SW-06-AD) - proposes to supersede AD 94-14-07, which requires an inspection and repetitive visual checks for slippage of the tail rotor drive and replacement of the tail rotor gearbox, if necessary. This action would require disassembly of the tail rotor gearbox to verify the installation of the input and output shaft keys between the input and output pinions and their respective shafts.
DEPARTMENTS OF TRANSPORTATION AND INTERIOR, which in March 1994 issued an advance notice of proposed rulemaking suggesting ways to further regulate air tour operators, have received more than 2,500 comments on the joint proposal. The agencies plan another round of public hearings later this year on the ANPRM.
FAA has issued a proposed advisory circular, AC 39-XX, on continued airworthiness assessments of turbine engines, propellers and auxiliary power units used on aircraft certified under Part 25. Comments on the proposed AC must be sent before June 23 to FAA, Attn.: Engine and Propeller Standards Staff, ANE-110, Engine and Propeller Directorate, Aircraft Certification Service, 12 New England Executive Park, Burlington, Mass. 01803-5299. For more information, contact Thomas Boudreau at (617) 238- 7117.
CLARK STEVENS was appointed to the board of directors of Mesa Air Group. Stevens, who became president of Mesa Air Group's FloridaGulf Airlines division in 1993, was promoted to president and chief operating officer of Mesa in January 1995.
AAR combined its two Singapore-based aircraft support operations into an expanded facility near Changi International Airport in Singapore. The facility houses both the sales office and maintenance base. The new AAR Asia-Pacific facility is located at #1, Loyang St., Singapore 1750; telephone: 65-542-9800; fax: 65-542-9811.
DASSAULT AVIATION'S Falcon 900EX long-range derivative of the Falcon 900 completed its first flight last week from the company's facility at Bordeaux-Merignac Airport in France. The 4,500-nautical-mile 900EX, unveiled during last fall's NBAA convention in New Orleans (BA, Oct. 10/156), is powered by three AlliedSignal TFE731-60 engines rated at 5,000 pounds thrust each. The aircraft is slated for delivery beginning in the fall of 1996.
A proposed advisory circular designed to address the most efficient ways of complying with small aircraft certification requirements has been published by FAA.
PATS, INC., the Columbia, Md. supplier of auxiliary fuel systems, has signed a cooperative agreement with BFGoodrich Aerospace/Tramco to provide long-range fuel system installations at the Tramco aircraft maintenance/modification facility in Everett, Wash. The PATS long-range fuel tanks can be installed as a post-delivery modification to new aircraft or a retrofit installation to aircraft already in service.
PRECISION STANDARD, INC., Birmingham, Ala., signed a memorandum of understanding with San Bernardino International Airport Authority to lease about one million square feet of hangar, manufacturing and warehouse space on about 70 acres at the former Norton Air Force Base in Southern California. Under the agreement, Precision will use nearly 650,000 square feet of space for its aircraft maintenance and modification center and will be able to sublease the balance of the space to other tenants.
United Parcel Service, accelerating its schedule, launched international next-flight-out service from the U.S. late last month. The new, round-the-clock delivery option will get packages to major business centers in the Asia/Pacific region, Europe and Latin America within 24 hours. UPS said the success of its domestic same-day service, launched April 17 by subsidiary SonicAir, prompted it to start the international version ahead of its original target of late 1995.