AMERICAN ELECTRONICS ASSOCIATION named Rep. Norman Mineta's (D-Calif.) former press secretary to the post of director of public affairs for the association. Beneva Schulte will be responsible for formulating media strategies and public relations policies and will be the primary spokesperson for AEA. Before working for Mineta, Schulte served on the staffs of two members of Congress from Minnesota, Reps. David Minge and Gerry Sikorski.
TELEDYNE CONTINENTAL MOTORS, formerly Bendix, S-20, S-200, S-600 and S-1200 series magnetos (Docket No. 93-ANE-44; Amdt. 39-9271; AD 94-01-03 R2) - revises an existing AD that requires replacement of Bendix ignition coils and rotating magnets, regardless of total time in service, with improved TCM ignition coils, rotating magnets and marking magnetos to indicate compliance. The AD only called for replacement of the ignition coils on S- 1200 series magnetos. This AD clarifies language in the AD to specify that the actions are mandatory.
AIR METHODS CORP., Denver, Colo., said North Carolina Baptist Hospital signed a five-year renewal of a contract under which Air Methods will continue to operate an emergency medical services helicopter for the hospital. In conjunction with the renewal, Air Methods is providing a new Bell Model 412 equipped with an intensive care interior. Under the AirCare EMS contract with the hospital, which is affiliated with Bowman Gray School of Medicine at Wake Forest University, Air Methods is providing an aircraft and pilot and maintenance services.
BARRY MASSEY was named manager of FlightSafety International's Greater Philadelphia/Wilmington Learning Center. Massey most recently served as manager of aviation management contracts for AMR Combs at Windsor Locks, Conn.
Japanese helicopter manufacturer Kawasaki Heavy Industries and Okura and Company, a trading house, have signed an agreement with EH Industries to jointly market and support the EH101 multi-role helicopter. Under the agreement, Kawasaki will assist in marketing, establish maintenance and support facilities, and, "when appropriate," manufacture the medium-lift helicopter in Japan, officials said.
Rockwell International's Collins Commercial Avionics signed a memorandum of agreement to jointly develop a product line of ground collision avoidance system (GCAS). The GCAS line will be based upon Collins traffic alert and collision avoidance system technology and a Dassault GCAS line replaceable unit, officials said. GCAS, an airborne system, alerts operators of controlled flight into terrain situations by identifying aircraft position through a worldwide terrain database integrated with onboard sensors.
HAMILTON STANDARD 14RF, 247F, 14SF and 6/5500/F series propellers (Docket No. 95-ANE-32) - proposes to supersede an existing AD that requires initial and repetitive inspections of the propeller control unit (PCU) servo ballscrew internal spline teeth for wear and replacement, if necessary. This proposed AD would increase the repetitive inspection interval from 1,500 to 2,500 hours time in service for propellers that have a ballscrew quill damper installed.
IF THE PART 121/135 PROPOSAL IS ADOPTED, it will "result in pricing the 10- to 19-passenger airplane out of scheduled airline business," Morgan said, observing that many operators will be forced to switch to smaller, piston-powered planes and travelers will have to fly on those smaller aircraft or drive instead of fly. "Either option will result in a substantial increase in accident exposure for travelers," Morgan said, adding that "if this proposal is adopted, as written, it will be the greatest degradation to public safety that this country has ever faced."
FOKKER Model F28 Mark 0100 series airplanes (Docket No. 94-NM-232-AD) - proposes to require modification of the rear spar-to-fuselage attachment. This proposal is prompted by a report indicating that, during full-scale fatigue tests, cracking was found in the coupling plate and web plate of the rear spar end fitting at the attachment of the main frame at fuselage station 17011 due to fatigue-related stress. The actions specified by this proposal are intended to prevent fatigue-related cracking, which could reduce the structural integrity of the wing.
AVIO-DIEPEN, a Fokker affiliate, signed a contract with Plastronic Hong Kong Limited to form a distribution center in Hong Kong. Avio-Diepen will own 60 percent of the new center, to be called Avio-Diepen Hong Kong, and Plastronic Hong Kong will own the remaining interest. The spare parts distribution facility is slated to be operational in August.
COLLINS COMMERCIAL AVIONICS was selected by Fokker Aircraft B.V. to provide satellite-based avionics systems for Fokker aircraft. Collins will supply its AVSAT flight management system with integrated GPS/FMS capability for the Fokker 70 and 100. The AVSAT system will include a global navigation satellite system (GNSS) navigation and landing unit (GNLU). Collins will perform the systems integration with the other major avionics systems. AVSAT, introduced in September, has been in a flight testing program since March. Collins expects certification in August 1996.
FAIRCHILD AIRCRAFT took aim last week at several elements of FAA's proposal to impose Part 121 standards on most operators of 10- to19-seat aircraft now operating under Part 135 of the Federal Aviation Regulations, but some of the most compelling statements regarded the estimated costs of implementing the proposed changes.In a detailed presentation at last week's public meeting on the Part 121/135 proposal in Las Vegas, Nev., Jack Morgan, chief of aviation safety and airworthiness for Fairchild, said: "The FAA has estimated that the proposed rule would cost the industry ab
NASA and the National Transportation Safety Board are joining forces to sponsor a symposium late this year on the problem of operator fatigue in transportation. The symposium, "Managing Fatigue in Transportation: Promoting Safety and Productivity," will examine fatigue in a number of transportation modes, including aviation. NTSB describes the Nov.
JETSTREAM Model ATP airplanes (Docket No. 94-NM-139-AD) - proposes to require modification of certain doors. This proposal is prompted by a report that an operator was unable to unlock a Type I passenger door due to migration of a shootbolt bush. The actions specified by the proposed AD are intended to prevent such migration, which could jam the Type I passenger door and subsequently delay or impede the emergency evacuation of passengers.
FEDERAL AVIATION ADMINISTRATION issued special conditions for Gulfstream Model 1159 aircraft modified by Learjet, Inc. of Denver, Colo. The aircraft will be equipped with a digital electronic flight instrument system and current regulations do not adequately address the protection of those systems from the effects of high-intensity radiated fields, FAA said. For more information on the special conditions, contact Mark Quam in FAA's Standardization Branch in Renton, Wash. at (206) 227-2145.
ECONOMIC DEVELOPMENT CORPORATION of Chippewa, County Mich. has issued a request for proposals for fixed-base operator services at Chippewa County International Airport. RFPs must be received on or before 4 p.m. July 17. To receive proposal specifications, contact the Economic Development Corporation at Chippewa County International Airport, 119 Airport Drive, Kincheloe, Mich. 49788; telephone: (906) 495-5631; fax: (906) 495-5714.
TWO PEOPLE were killed Friday when their Beech Baron crashed shortly after taking off from Executive Airport in Orlando, Florida. FAA officials said the aircraft was en route to Jacksonville at the time of the accident.
The Bombardier Business Aircraft Division plans to build a Canadair Special Edition (SE) version of the Regional Jet for corporate and government customers. The Canadair SE will have a 3,000-nautical-mile range. Officials said maximum gross takeoff weight will be 53,000 pounds, allowing an additional 4,000 pounds of fuel to be stored in two new auxiliary tanks located aft.
Coltec Industries will buy AlliedSignal's aircraft landing gear business and Coltec's Menasco division will form a strategic alliance with AlliedSignal to develop integrated landing systems. The companies said Coltec's acquisition will include development and production of landing gears for the Navy F/A-18E/F fighter and production and support of existing programs such as the F-14 and F-15 fighters. AlliedSignal's wheels and brake control businesses are not included in the deal.
DE HAVILLAND Model DHC-8-102, -103, and -106 series airplanes (Docket No. 95-NM-104-AD; Amdt. 39-9262; AD 95-12-12) - requires repetitive operational testing of the stall warning computers to ensure activation of the associated stick shakers and replacement of non-operational stall warning computers with new or serviceable units. This action also provides an optional terminating action for the repetitive operational tests.
FEDERAL AVIATION ADMINISTRATION last week said it plans to order U.S. airlines to replace the software in Honeywell windshear detection systems on 1,618 transport aircraft because they may not give pilots enough warning that they are encountering windshear when the aircraft's flaps are in motion. FAA's action stems from a recommendation by the National Transportation Safety Board following an investigation of the July 2, 1994 crash of a USAir DC-9 while it was attempting to land at Charlotte, N.C. The accident kllled 37 passengers.
STEPHEN WALTER was named vice president-senior environmental planner for De Leuw, Cather&Company, a subsidiary of The Parsons Corp. In his new position, Walter will oversee the environmental planning of airports, highways, railroads, airports, commercial developments and marinas.
BRITISH AEROSPACE Model BAC 1-11 200 and 400 series airplanes (Docket No. 94-NM-184-AD) - proposes to require various repetitive inspections for cracks in certain panels of the lower skin of the wing and in certain fixed ribs of the leading edge of the wing. This proposal also would require repair or replacement of cracked parts, which would terminate certain repetitive inspections. This proposal is prompted by reports of cracking in certain panels of the lower skin of the wing and in certain fixed ribs of the leading edge of the wing due to fatigue-related stress.
AEROSPACE INDUSTRIES ASSOCIATION said Rolls-Royce North America, Inc., has joined the association. Rolls-Royce North America's primary participant in AIA will be Allison Engine Company, which Rolls acquired in March (BA, March 27/130), and its representative on the AIA board will be John W. Sandford, president.