J. LELAND (LEE) ATWOOD, former president and chief executive of Rockwell International Corp., died March 5 of natural causes in St. John's Hospital in Santa Monica, Calif. He was 94. Atwood, who began his career as a junior airplane designer with the Army Air Corps at Wright Field in Dayton, Ohio in 1928, moved to Douglas Aircraft in 1930 where he met another aviation pioneer, James H. (Dutch) Kindelberger. Both men moved to North American Aviation in 1934 and by 1948 Atwood was elected president of NAA.
CASA, the Spanish aircraft manufacturer, selected Sextant Avionique's Topdeck avionics suite for its new C-295 military transport as well as the CN-235-300 transport. Sextant also will be prime contractor for overall system integration, including all equipment associated with the Topdeck suite: radios, weather radar, TCAS and GPWS.
NASA'S AMES RESEARCH CENTER at Moffett Field, Calif. is conducting wind tunnel tests of a full-scale replica of the 1903 Wright Flyer to learn more about its stability, control and handling characteristics. Test results will be used to compile a historically accurate aerodymanic database for the Wright Flyer. A team of volunteers from the Los Angeles section of the American Institute of Aeronautics and Astronautics will use the wind-tunnel data to build a second Wright Flyer. That replica will be flown on Dec.
As a condition of its approval of Signature Flight Support's acquisition of the AMR Combs chain of fixed-base operations, the Justice Department is requiring Signature to sell FBO assets at three airports: Bradley International Airport in Windsor Locks, Conn., (BDL); Palm Springs, Calif. Regional Airport (PSP); and Centennial Airport (APA) in Englewood, Colo. just outside Denver (BA, March 8/113).
CARL JONES, director of quality assurance at JetCorp, was selected as the 1999 St. Louis District and FAA Central Region Aviation Maintenance Technician of the Year. Jones has 21 years of aviation experience. He has spent the past six years with JetCorp, and serves as an aviation safety counselor for FAA's St. Louis Flight Standards District Office.
ATLANTIC AVIATION signed a five-year maintenance training contract with FlightSafety International. FSI will train Atlantic technicians on a number of corporate aircraft, including Falcon 2000/900/50/20/10, Gulfstream II/III/IV/V, Challenger 601/604, Galaxy 1125/1124 and Raytheon Hawker 1000/800/700/600.
The AOPA Air Safety Foundation named a veteran Maryland flight instructor vice president of training for the foundation. Richard Hiner, 60, will be responsible for the approximately 100 ASF Flight Instructor Clinics and 200 safety seminars presented by the foundation each year in the U.S. The association said he plans to expand the number of topics covered in the clinics and seminars. With more than 2,100 hours of instruction given, Hiner remains an active flight instructor. He is the owner of a 1961 Piper Colt.
BELL Model 214ST helicopters (Docket No. 98-SW-27-AD; Amdt. 39-11037; AD 99-04-13) - requires a reduction of the never-exceed velocity (Vne) limitation until an inspection of the tail rotor yoke assembly for fatigue damage and installation of a redesigned yoke flapping stop are accomplished. Recurring periodic and special inspections to detect occurrences of yoke overload are also required. This amendment is prompted by reports of inflight failures of yokes installed on civilian and military helicopters of similar type design.
EMBRY-RIDDLE AERONAUTICAL UNIVERSITY is spearheading a national initiative to promote aviation maintenance as a career. The university held a conference last month to discuss concerns of aviation maintenance technician shortages and will hold the next meeting June 8 in Daytona Beach, Fla.
SUPERIOR AIR PARTS created a technical support team in its Manufacturing Business Unit to provide service for customers. The team is managed by Tim Archer, vice president of sales and marketing, and includes Gary Greenwood, national sales and marketing manager; John Lauer, Eastern technical support manager; and, Darrell Ingle, Western technical support manager.
RAYTHEON AIRCRAFT sold a Beechjet 400A and Hawker 800XP to Hainan Airlines Company Limited for use in charter operations. The Beechjet is Raytheon's first jet to enter service in the People's Republic of China.
THE BOEING COMPANY rolled out the first two next-generation 737s built at the increased rate of 24 airplanes per month, which Boeing said "is the highest ever for a single commercial airplane model." One of the 737s was a Boeing Business Jet and the other a 737-800. "This efficient rate increase allows us to deliver more quality airplanes on time, to better meet our customer expectations and to focus on earning a better return for our shareholders," according to John Hayhurst, vice president and general manager of 737 Programs.
Crosswinds Commercial, Inc., plans to build "fly-in commerce centers" at two airports in Michigan: Willow Run, outside Detroit; and Bishop International, near Flint. The centers would be business parks with direct runway access. A company official said Crosswinds is trying to introduce manufacturing companies to a new concept in the Midwest that is popular in the southwest U.S.
Illustration: Graph: Used retail jet and turboprop deliveries inside and outside North America for February 1999 (see related graphs on Pages 129 and 130 of the hard copy of this issue.) Used Retail Deliveries FEB. '96 FEB. '97 FEB. '98 FEB. '99 L M H L M H L M H L M H Jet North 56 34 10 43 20 18 43 33 17 45 33 20 America Jet Outside 6 1 2 9 2 0 8 3 1 11 2 1 N.
House transportation appropriations subcommittee leaders last week voiced strong opposition to taking the aviation trust fund off budget. At the same time, appropriations subcommittee members questioned whether user fees would be a viable alternative.
HOUSE TRANSPORTATION AND INFRASTRUCTURE COMMITTEE last week approved the National Parks Air Tour Management Act in two separate venues. The act, which provides for the regulation of air tours over national parks, was included in comprehensive aviation reauthorization legislation, H.R.1000. The committee also approved the act as a stand-alone bill, H.R.717, which would allow the measure to continue to proceed through the House even if the more comprehensive legislation stalls.
BRITISH AEROSPACE Model Jetstream 4101 airplanes (Docket No. 96-NM-214-AD) - revises an earlier proposal that would have required repetitive inspections to detect damage of the structure associated with the engine nacelle fairing attached to the wing flaps, and repair of any damage found; drilling a new drain hole in each engine nacelle fairing; and applying a sealant to the gap between the wing flap and engine nacelle fairing. That proposal was prompted by reports of fatigue cracks found in the structure that attaches the engine nacelle fairing to the wing flaps.
A PUBLIC MEETING to discuss the next phase of an environmental noise assessment at Bradley International Airport in Windsor Locks, Conn. will be held March 30 at 7:30 p.m. at the Connecticut State Fire Academy's Cafeteria. The meeting is designed to "provide details on the analysis in progress for determining the preferred departure procedure(s) for Runway 6-24 at Bradley." For more information, contact the Connecticut Department of Transportation at (860) 594-2550.
A company called Wineco Productions, of Palm Beach, Fla., signed a contract to buy Gallatin Airport, Sumner County, Tenn., 15 miles from Nashville. Facilities on site include a Cessna dealership, an authorized maintenance shop for corporate aircraft and a fuel concession. The airport's runway is 5,000 feet long. Wineco said the airport is used by "high-profile" country music stars thanks to its proximity to Nashville, and it expects further growth in that area.
JET AVIATION BUSINESS JETS, based at Zurich Airport in Switzerland, added a Challenger 601 to its charter fleet. Jet Aviation provides charters with a variety of aircraft, including Cessna Citation II and VII, Challenger 601 and 604, Gulfstream III and DC-8-72.
HOWMET CORP. said the Department of the Air Force withdrew a notice of proposed debarment against the company. The manufacturer said that outside of its Cercast operations, "there was no allegation of wrongdoing of any kind associated with Howmet" so Howmet "is now able to resume accepting U.S. government contracts and subcontracts."
SENATE COMMERCE COMMITTEE members are drafting a provision to extend the authorization for the Airport Improvement Program for two more months.The provision, which would be included in emergency supplemental appropriations legislation currently before the House and Senate, would give legislators more time to win passage of more comprehensive, long-term reauthorization legislation. Current AIP authorization expires March 31. The House already has approved a six-month extension, but Sen. John McCain (R-Ariz.) has opposed the six-month extension.
THE '99 JET&PROPJET CORPORATE DIRECTORY is off the presses, listing more than 18,000 business turbines in operation with 11,826 flight departments worldwide, plus information on another 5,000 turbine-powered aircraft operated by governments and military organizations and turbine aircraft retired or written off. Compiled by Peter Simmonds and David Richardson and published by AvCom International of Wichita, Kan., the 400-plus-page directory provides the registration number, type and model, serial number and owner of each of the aircraft listed.
PIAGGIO P-180 Airplanes (Docket No. 98-CE-96-AD) - proposes to require inspecting both (left- and right-wing configurations) environmental control system bleed tubes for damage, leaks, and a correct gap between the tube and wing lower panel crossing area, inspecting the wiring and surrounding structures for damage, and correcting any discrepancies found. The proposed AD is the result of mandatory continuing airworthiness information issued by the airworthiness authority for Italy.
DORNIER Model 328-100 series airplanes (Docket No. 96-NM-110-AD) - revises an earlier proposed AD, which would have required repetitive inspections for chafing of various control cables, and replacement of any chafed cable. That proposal was prompted by chafing of various control cables found during inspections conducted at the manufacturer's facility and at overhaul facilities.