LUFTHANSA CONSULTING opened an office in Los Angeles, Calif. to focus on growing business opportunities in the U.S., Latin America and Pacific Rim. Lufthansa said the new office "is a strategic partnership with Robert J. Aaronson, a prominent aviation executive and his team of U.S. experts." Aaronson previously served as president of the Air Transport Association of America and director of aviation for the Port Authority of New York and New Jersey. Aaronson will serve as senior vice president-North America.
DE HAVILLAND Models DHC-2 Mk. I, DHC-2 Mk. II, and DHC-2 Mk. III airplanes (Docket No. 99-CE-05-AD) - proposes to require repetitively inspecting the rear fuselage bulkhead at Station 228 for cracks. The proposed AD also would require repairing any crack found or replacing any cracked rear fuselage bulkhead in accordance with a repair or replacement scheme obtained from the manufacturer through FAA. The proposed AD is the result of mandatory continuing airworthiness information issued by the airworthiness authority for Canada.
HOUSE AND SENATE leaders last week agreed on a provision that would extend Airport Improvement Program authorization, due to expire at the end of the month, until Aug. 6, the start of the month-long summer recess for Congress. The provision is expected to be included in the fiscal 1999 supplemental funding package, which is in a House/Senate conference. The decision apparently is linked to assurances that Transportation Committee Chairman Bud Shuster's AIR-21 broad-based aviation package will receive consideration on the House floor the week of June 14.
FlightSafety International is undergoing a major expansion with plans for a number of new centers throughout the U.S. as well as internationally. The company last week announced plans for a center near Memphis International Airport, which will initially house bays for four simulators, including a Saab 340 and a Canadair Regional Jet. At the same time, FlightSafety detailed plans to relocate its Cincinnati training center to Comair's new headquarters at Cincinnati/Northern Kentucky International Airport.
RAYTHEON Models C90A, B200, B200C, B200T, B200CT, 300, B300, B300C, and A200CT airplanes (Docket No. 98-CE-104-AD; Amdt. 39-11143; AD 99-09-10) - requires installing a filter element in the landing gear hand pump suction line. This AD is the result of reports of the potential for debris to enter the landing gear hand pump and interfere with its operation, which could prevent the nose landing gear from being extended manually. Two occurrences were reported of nose landing gear collapse after manual extension.
Dassault Aviation won an order from National Aircraft Services of Jeddah, Saudia Arabia for 10 Falcon 2000s and the lease of two more. Executive Jet Inc. will operate the aircraft for NAS and NAS will market and sell the Falcon 2000 interests in the NetJets Middle East fractional ownership program. The aircraft will be fitted similarly to the Falcon 2000s operated in Executive Jet's NetJets Europe program. The contract, which could carry a potential value of more than $200 million, calls for delivery of the first Falcon 2000 late next year.
Summary: Pursuant to FAA's rulemaking provisions governing the application, processing, and disposition of petitions for exemption (14 CFR Part 11), this notice contains a summary of certain petitions seeking relief from specified requirements of the Federal Aviation Regulations (14 CFR Chapter I), dispositions of certain petitions previously received, and corrections. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities.
Bombardier this month won European Joint Aviation Authorities type certification for its Global Express long-range business jet. The aircraft won similar approval from Transport Canada July 31 and the Federal Aviation Administration Nov. 13. "This is the last major milestone in the Global Express development program before aircraft are delivered to customers," said John Holding, Bombardier Aerospace executive vice president of engineering and product development.
EUROCOPTER FRANCE Model SE 3130, SE 313B, SA 3180, SA 318B, and SA 318C helicopters (Docket No. 98-SW-54-AD; Amdt. 39-11150; AD 99-09-16) - supersedes an existing AD that requires a visual inspection of the main rotor blade reinforcement strips for debonding between the reinforcement strips of the blade; and a visual inspection of the main rotor blade skin for cracks or corrosion, and replacement of the blade with an airworthy blade if certain debonding or a crack or corrosion is found.
ROLLS-ROYCE established a joint venture with partners in Israel for the manufacture of aircraft engine compressor blades. The new company, Techjet (Israel) Ltd., is 50 percent owned by Rolls-Royce, with Blades Technology Ltd. holding a 30 percent share and Wertheimer Company Ltd. owning the remaining 20 percent. Rolls-Royce said that when the new entity is fully established in early 2000, it will forge and machine up to 450,000 compressor blades a year. The new facility is located in Tefen, in northern Israel.
BMW Rolls-Royce GmbH is expanding its facilities at Dahlewitz, near Berlin, Germany, as part of its plans to boost production of its BR700 turbofan product line from 220 to 300 engines a year. The expansion, a 15 million-Deutsche Mark investment program (about $8.2 million U.S.), is expected to be completed by early 2000. BMW Rolls, which currently employs 1,000 people at Dahlewitz, expects to hire an additional 100 employees once the expansion is complete.
EUROCOPTER FRANCE Model AS-350B, B1, B2, B3, BA, and D helicopters, and Model AS 355E, F, F1, F2 and N helicopters (Docket No. 98-SW-44-AD; Amdt. 39-11139; AD 99-09-06) - requires inspecting the tail rotor spider plate bearing for the proper bearing rotational torque, axial play, and for any brinelling of the bearing. This amendment is prompted by service difficulty reports citing the need to prematurely replace bearings due to wear, and by two in-flight incidents of increased tail rotor vibration levels due to bearing wear.
Summary: Pursuant to FAA's rulemaking provisions governing the application, processing, and disposition of petitions for exemption (14 CFR Part 11), this notice contains a summary of certain petitions seeking relief from specified requirements of the Federal Aviation Regulations (14 CFR Chapter I), dispositions of certain petitions previously received, and corrections.
The Federal Aviation Administration will delegate its international safety oversight strategy "in the near term," looking to the International Civil Aviation Organization (ICAO) to take the lead in performing on-site safety visits. "ICAO will be the standard setter and standard monitor," said Nick Lacey, FAA director of flight standards. In the process, FAA will replace Category 3 safety standards with two straightforward designations - Cat 1 for countries that comply with FAA and ICAO standards and Cat 2 for those that do not.
Federal Aviation Administration last week called for repetitive operational tests of the flap asymmetry detection system on nearly 160 Dassault Falcon 900, 900EX and 2000 business jets. The notice of proposed rulemaking, which was published in the May 3 Federal Register and follows a service bulletin Dassault already issued to operators, also would require repetitive replacement of the inboard flap jackscrews and repetitive measurement of the screw/nut play for discrepancies.
REP. JAMES HANSEN (R-Utah) is still upset with the National Park Service's plan to establish an aircraft noise limit of 8 dB below ambient sound over most of the Grand Canyon National Park and has rescheduled a previously postponed hearing to address the issue (BA, March 22/132). The chairman of the House subcommittee on National Parks and Public Lands has invited the Park Service to explain its actions in a May 25 hearing before his subcommittee. That hearing also will include testimony by the United States Air Tour Association, which opposes the new limits.
DERLAN, INC., Santa Ana, Calif., shipped the first external fuel tanks to Eurocopter Deutschland GmbH of Donauworth, Germany for installation on Sikorsky CH-53 Sea Stallion helicopters operated by the German military. The filament-wound, composite tanks are part of a contract for 21 shipsets (42 tanks).
FEDERAL AVIATION ADMINISTRATION commissioned a new instrument landing system for Runway 13 at Reading Regional Airport. The new ILS approach, the second ILS to be commissioned at Reading, offers pilots the option of an instrument approach to the airport's longest runway, which is 6,350 feet in length.
SALT LAKE CITY Department of Airports is seeking bids until May 20 for lease of the executive terminal building on the east side of Salt Lake City International Airport. The two-level building includes 24,000 square feet of office space and 4,800 square feet of common areas. Submit statements to Russell Pack, Salt Lake City Department of Airports, AMF Box 22084, Salt Lake City, Utah 84122. For more information, call (801) 575-2915.
THE BOEING COMPANY, which has taken a number of recent steps aimed at getting its financial house in order, named a Lockheed Martin executive to a senior financial post. Walter E. Skowronski, 50, was named vice president of finance and treasurer, "a newly expanded position" reporting to Debby Hopkins, Boeing's new chief financial officer. Skowronski had been vice president and treasurer at Lockheed Martin in Bethesda, Md. "Walt's industry expertise will add great momentum to our efforts in building a world-class treasury organization," said Hopkins.
BELL Model 230 helicopters (Docket No. 98-SW-48-AD; Amdt. 39-11137; AD 99-09-05) - requires initial and repetitive visual inspections and verification of the torque of the bolts on the main rotor hub. This amendment is prompted by a report of fatigue cracks around the bolt holes of the main rotor pitch horn and a cracked main rotor flapping bearing assembly on a similar model helicopter.
M. ANTHONY STONE was appointed global sales and marketing manager for PPG Industries. Stone, who previously was an account manager for PPG, will be responsible for worldwide aftermarket sales of windshields and windows and manage the direct sales and distribution team.
RAYTHEON Models A36, B36TC, 58, 58A, C90A, B200, B300, and 1900D airplanes (Docket No. 99-CE-11-AD; Amdt. 39-11148; AD 99-09-15) - requires inspecting for interference or inadequate clearance between the flight control mechanism and any component located forward of the instrument panel. If interference or inadequate clearance is found, this AD requires securing all components so that they are clear of the flight control mechanism.
SUNDSTRAND CORP. scheduled a special stockholders meeting June 10 for the purpose of approving the merger with Hamilton Standard, a United Technologies Co. The meeting will begin at 8 a.m. at the St. Regis Hotel in New York.
FLIGHT SAFETY FOUNDATION elected Francis W. Daly, president and chief executive officer of AlliedSignal Aerospace Avionics and Lighting business unit, and Carl Sigel, executive vice president, operations for Lufthansa, to its board of governors.