The Weekly of Business Aviation

Staff
PRATT&WHITNEY R-1340 series reciprocating engines (Docket No. 97-ANE-58-AD; Amdt. 39-11173; AD 99-11-02) - requires initial and repetitive visual and fluorescent penetrant inspections of cylinders for head cracking. This amendment is prompted by reports of cylinder head cracking. The actions specified by this AD are intended to prevent cylinder head cracking, which can result in engine power loss, forced landing, and damage to the aircraft.

Staff
Raytheon Company successfully completed "the third and last incremental System Acceptance Test (SAT) of the full service level software of the Standard Terminal Automation Replacement System (STARS)" at the manufacturer's facility in Marlborough, Mass., Raytheon said. The completion of the latest test phase is a "major milestone" and "a significant achievement" for the program that is designed to provide aircraft data for air traffic controllers, the company said.

Staff
HARTZELL PROPELLER won FAA certification for its three-bladed aluminum propeller system for Found Aircraft's FBA-2C1 Bush Hawk utility aircraft. The Bush Hawk, a high-wing, all metal five-seat aircraft, has received Transport Canada certification on floats and conventional gear, and U.S. certification is pending.

Staff
DASSAULT FALCON JET named Ronald Zielinski to succeed Neil MacDonald, who is retiring June 30 as vice president of marketing for the Western U.S. after 39 years of service with Dassault and Pan American World Airways. Pan Am distributed Dassault's original Falcon 20 model beginning in 1963. Zielinski, who has begun to transition into the new position, currently is vice president of international marketing. Dassault tapped Jeffrey Habib, currently international sales manager for North Asia, to assume Zielinski's international marketing duties.

Staff
EMBRAER Model EMB-145 series airplanes (Docket No. 99-NM-98-AD) - proposes to require a one-time ultrasonic inspection of the maneuvering actuator piston rod of the main landing gear to ensure adequate wall thickness of the piston rods; and replacement of any discrepant piston rod with a new piston rod. This proposal is prompted by issuance of mandatory continuing airworthiness information by a foreign civil airworthiness authority.

Staff
AEROSPATIALE Model ATR 42 and ATR 72 series airplanes (Docket No. 99-NM-50-AD; Amdt. 39-11152; AD 99-09-19) - requires revising the Airplane Flight Manual to provide the flightcrew with modified procedures and limitations for operating in severe icing conditions. This amendment is prompted by issuance of mandatory continuing airworthiness information by a foreign civil airworthiness authority.

Staff
The Joint Aviation Authorities' latest proposal to alter its flight crew licensing requirements for European students that train in the U.S. is a "positive step," but needs to go further to remove trade barriers, the National Air Transportation Association told JAA. JAA originally adopted rules, scheduled to take effect July 1, that would impede conversion of an FAA-issued license to a JAA license because the regulations require flight training to be conducted in JAA-registered aircraft and would not compel all member countries to recognize the conversion, NATA said.

Staff
GAMA last week expressed frustration to the Joint Aviation Authorities that the European agency takes much longer to validate FAA-certified products than FAA takes to certify foreign products. GAMA's Bolen noted that U.S. manufacturers undergo almost a second certification for their products since JAA spends about 50 percent as much time validating FAA certification as it takes to win original U.S. certification. FAA's validation process, by comparison, is about 15 percent to 20 percent of the JAA certification period, Bolen said.

Staff
JAMES MEAD was appointed general manager of flight support for Atlantic Aviation's facility in Teterboro, N.J. Mead formerly was director of business marketing for Executive Beechcraft STL, Inc. and also has been president and owner of Aviation Resources and St. Louis Cabins Supplies, customer service manager for American Jet Aviation and fleet support representative for Rockwell's Sabreliner Division.

Staff
Summary: Pursuant to FAA's rulemaking provisions governing the application, processing, and disposition of petitions for exemption (14 CFR Part 11), this notice contains a summary of certain petitions seeking relief from specified requirements of the Federal Aviation Regulations (14 CFR Chapter I), dispositions of certain petitions previously received, and corrections. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities.

Staff
EMBRAER Model EMB-145 series airplanes (Docket No. 99-NM-93-AD; Amdt. 39-11159; AD 99-10-05) - requires replacement of certain flexible joints and O-rings of the rear fuselage with improved flexible joints and new O-

Staff
SAAB Model 2000 series airplanes (Docket No. 97-NM-151-AD) - revises an earlier proposed AD, which would have required repetitive inspections for excessive wear of the aileron control cables, cable guides, and cable pulleys located at the rear wing spars; and corrective actions, if necessary. That proposal also would have required repetitive replacement of the control cables and cable guides with new or serviceable components. That proposal was prompted by issuance of mandatory continuing airworthiness information by a foreign civil airworthiness authority.

Staff
ExecutiveJet and FlightSafety International unveiled a new Citation V Ultra Level D simulator in ExecutiveJet's Columbus, Ohio operations center last week, the first of three simulators that FSI will build and operate to train ExecutiveJet pilots.

Staff
RAYTHEON Models 65-90, 65-A90, 65-A90-1, 65-A90-2, 65-A90-3, 65-A90-4, B90, C90, C90A, E90, H90, and F90 airplanes (Docket No. 99-CE-18-AD; Amdt. 39-11171; AD 99-10-07) - publishes in the Federal Register AD 99-10-07, which was sent previously to all known U.S. owners and operators of Beech 65-90, 65-A90, 65-A90-1, 65-A90-2, 65-A90-3, 65-A90-4, B90, C90, C90A, E90, H90, and F90 airplanes.

Staff
The Federal Aviation Administration plans to launch an industry-wide audit of commercial air carriers this month to assess their compliance with federal flight and duty time requirements for pilots, the National Air Transportation Association said Friday.

Staff
Stellex Precision Machining of Wellington, Kan., signed a long-term contract with Gulfstream Aerospace of Oklahoma City, Okla. for the Gulfstream V business jet program. The agreement, valued in excess of $17 million, runs through 2003 and covers 123 different components for the G-V.

Staff
BRITISH AEROSPACE Model BAC 1-11 200 and 400 series airplanes (Docket No. 98-NM-307-AD; Amdt. 39-11157; AD 99-10-03) - requires an inspection for cracking of the flap control lever and to identify the material from which the lever is made; replacement of the flap control lever with an improved part, if necessary; and repetitive inspections for airplanes having a lever made from certain material. This amendment is prompted by issuance of mandatory continuing airworthiness information by a foreign civil airworthiness authority.

Staff
Precision Castparts Corp. Tuesday began a cash tender offer and consent solicitation for Wyman-Gordon notes. PCC, of Portland, Ore., said May 17 that it had executed an agreement to acquire Wyman-Gordon, of North Grafton, Mass. PCC makes structural investment castings and castings for jet engines. Wyman-Gordon makes advanced forgings and castings for aerospace, energy and industrial markets. The action announced Tuesday relates to $150 million of Wyman-Gordon notes due Dec. 15, 2007.

Staff
CHET PHILLIPS was appointed sales representative for Professional Aviation Associates. Phillips, who will work in PAA's Learjet Division, previously served in the spare parts sales division and customer service with Bombardier Aerospace in Wichita, Kan.

Staff
The VanAllen Group will conduct a two-day "Disaster Response Planning for Business Aviation" workshop June 17-18 at the Atlanta Airport Hilton&Towers. Sponsored by Flight Safety Foundation, the highly interactive workshop will include a simulated accident scenario to illustrate the flow of events and identify key issues resulting from a business aircraft accident.

Staff
AVIONS PIERRE ROBIN Model R2160 airplanes (Docket No. 98-CE-79-AD; Amdt. 39-11155; AD 99-10-01) - requires replacing the wing attachment bolts and associated hardware. This AD is the result of mandatory continuing airworthiness information issued by the airworthiness authority for France. The actions specified by this AD are intended to prevent a wing from separating from the airplane caused by damaged wing attachment bolts. FAA estimates the AD will cover 10 airplanes on the U.S. Registry at a cost of compliance of $26,000, or $2,600 per airplane.

Staff
ARINC INC. formed a team to respond to FAA's screening information request for oceanic modernization services. ARINC said FAA's objective is to "modernize its oceanic air traffic control services using modern technologies to obtain significant operational and economic benefits." As part of that effort, FAA will upgrade its oceanic services at the air route traffic control centers at Oakland, Calif., Anchorage, Alaska and Ronkonkoma, N.Y.

Staff
Delta Airlines hopes to streamline shop floor work and let its mechanics focus more on the tasks at hand instead of on administrative work, now that it's signed a "multimillion-dollar" deal with Cimlinc to use the software maker's Shop Excellerator product. Delta signed up for the product after an extensive "proof-of-concept demonstration" that began about a year ago. The carrier should have it up and running on the shop floor by the middle of the year and eventually will have 5,000 mechanics tapping into the system.

Staff
AVIONS PIERRE ROBIN Model R2160 airplanes (Docket No. 98-CE-81-AD; Amdt. 39-11156; AD 99-10-02) - requires inspecting to assure that the fuel filler cap has a 2.5-millimeter-diameter hole drilled through it or that a vinyl piping is connected to the filler neck inside the cabin. If neither of these items exists, this AD requires replacing the fuel filler cap with a fuel filler cap that has a 2.5-mm-diameter hole drilled through it. This AD is the result of mandatory continuing airworthiness information issued by the airworthiness authority for France.

Staff
DALLAS AIRMOTIVE recently completed critical tests for certification of the Rolls-Royce Spey 511-8 hush kit and is preparing to install the production noise suppressor system on a Gulfstream II aircraft. The test verified that a hush-kitted Spey 511-8 met the operational parameters as the standard exhaust nozzle assembly. The G-II is scheduled to arrive at Dallas Airmotive's facility at Dallas Love Field in mid-June and noise certification flight tests will be conducted in early July. Dallas Airmotive expects certification by October.