BUSINESS AVIATION interests are expected to file a request for an injunction to block implementation of the Stage 2 non-addition rule at the Van Nuys, Calif. Airport (VNY) along with a formal Part 16 complaint with FAA (BA, April 24/189). Affected airport businesses on the airport and national trade associations plan to combine resources and join forces in the legal challenge to the Van Nuys anti-noise rules.
ANDREW GRANUZZO, retired U.S. Navy rear admiral, was named vice president of safety for Emery Worldwide Airlines. Granuzzo will be responsible for strategic planning, safety audits and assessments, regulation compliance and safety management for Emery.
CESSNA AIRCRAFT COMPANY named one of its former airframe and powerplant mechanics as the recipient of an award for improving aviation safety and product development. David E. Newell, director of aviation and travel for VF Corp., Greensboro, N.C., received the annual Vern Lowe Award from Cessna officials. The award is named for the former chief of maintenance for Upjohn, who made significant contributions to the Citation III maturity process by providing operational experience and data to Cessna's engineering staff.
DASSAULT FALCON JET achieved ISO 9002 certification last month for its Teterboro, N.J. headquarters operation. The company hopes to achieve ISO 9002 certification for its Little Rock, Ark. manufacturing facility by the end of the year.
GE SUPPORT SERVICES, a supplier of engine support equipment for commercial and military aircraft, partnered with Hydro USA and Aircraft Tool&Maintenance to provide mechanical and electrical ground support equipment. "With Hydro and ATME on our team, and our growing e-commerce capabilities, we offer customers a one-stop-shop solution for ground support equipment," said Ron Ettinger, manager GSE sales and marketing.
LEE COUNTY PORT AUTHORITY said construction is under way on a 10,000-square-foot airplane and helicopter maintenance facility at the Page Field General Aviation Airport in Fort Myers, Fla. The building will include seven offices, a conference room, a parts-storage area and hangar space large enough for corporate jets. Gulfshore Maintenance, which owns the building, is expanding its business from flight training, sight-seeing and aerial photography to aircraft maintenance and repair.
The United States Air Tour Association, represented by the Mountain States Legal Foundation, asked a U.S. Appeals Court to suspend implementation and enforcement of two final rules issued by FAA and the National Park Service restricting air tour flights at Grand Canyon National Park.
JAMES WALIZER was named field service representative for Dassault Falcon Jet. Walizer, who will be based in the Chicago area, has more than 20 years of aviation maintenance experience with the U.S. Coast Guard. He specialized in the HU-25 Falcon fleet and received the USCG Commendation Medal for superior fleet-wide technical support.
JOHN HOUSE, director of communications for Dassault Falcon Jet, plans to retire this summer. House has been in charge of public relations for the French aircraft manufacturer's North American operations for nearly 20 years. Announcement of a successor is anticipated within the next few weeks.
NASA'S Small Aircraft Transportation System initiative (SATS) received another setback this week after the House Appropriations Committee narrowly defeated a proposed amendment (23-22) to restore $321.7 million in mostly aeronautics funding that was cut from the agency's fiscal 2001 budget request. Included in that funding cut was NASA's request for $9 million in seed money for SATS research.
NATIONAL BUSINESS AVIATION ASSOCIATION's Board of Directors named Edward W. Stimpson as the recipient of the 2000 NBAA Award for Meritorious Service to Aviation and Rodney K. Kauber as the recipient of the John P. (Jack) Doswell Award. The Meritorious Service award is presented to an individual "who, by virtue of a lifetime of personal dedication, has made significant, identifiable contributions that have materially advanced aviation interests." Stimpson, the U.S.
FRASCA INTERNATIONAL'S King Air C90B flight training device installed at SimuFlite Training International won FAA Level 5 Qualification. The FTD, used by SimuFlite's QuickTurn division, includes a two-tube Collins EFIS 84 system with autopilot controls and GPS. The C90B FTD is the first of four new devices QuickTurn ordered. QuickTurn, which also operates an earlier C90 model FTD, also ordered FTDs for Cessna, Aero Commander and Piper aircraft. Frasca will build those FTDs to Level 5 Qualification standards as well.
Model MD900 helicopters (Docket No. 2000-SW-04-AD; Amdt. 39-11730; AD 2000-10-06) - requires visually inspecting the drive shaft to determine the assembly part number (P/N) and marking the drive shaft assembly P/N and serial number (S/N) on any unmarked drive shaft. This AD also requires creating a component history card or equivalent record for certain drive shaft assemblies and replacing any drive shaft assembly that has reached its life limit.
Model 1124 and 1124A Westwind Airplanes (Docket No. 2000-NM-42-AD; Amdt. 39-11728; AD 2000-10-04) - requires a one-time X-ray inspection to detect missing rivets at the rib-to-spar connection of the aileron ribs, and corrective actions, if necessary. This action is necessary to prevent cracking of the aileron skin due to missing rivets, which could reduce the structural integrity of the aileron and consequently reduce controllability of the airplane. This action is intended to address the identified unsafe condition.
FAA last week announced a new coordination and planning system to reduce air traffic delays. The Departure Spacing Program (DSP), part of FAA's Spring 2000 Initiative, coordinates departures and spaces aircraft more evenly using air traffic information supplied from properly equipped airports and from filed flight plans. "Using DSP, controllers can coordinate rerouting to avoid severe weather and reduce the need for voice communication between air traffic control facilities by providing flight plan information and reports," FAA said.
RIC BRAINARD was promoted to national aviation sales manager for ElectroSonics in Columbus, Ohio. Brainard, formerly sales manager for ElectroSonics, has 17 years of avionics sales experience with ElectroSonics, AlliedSignal and BFGoodrich.
Eclipse Aviation Corp. is doing things differently in the development and production of its new entry-level, twin-turbofan aircraft, and that includes dealing with more customers than it expected.
Model G-159 Series Airplanes (Docket No. 99-NM-138-AD; Amdt. 39-11735; AD 2000-10-11) - requires an inspection to determine the type of pneumatic deicing boots, and an Airplane Flight Manual (AFM) revision only for those airplanes equipped with "modern" boots. This amendment is prompted by reports of inflight incidents and an accident that occurred in icing conditions in which the airframe pneumatic deicing boots were not activated.
The French Connection aerobatic team, Daniel Heligoin and Montaine Mallet, were killed May 27 when their CAP 10B aircraft collided and crashed while they were filming a promotional videotape at Flagler County Airport in Bunnell, Fla. where their flight school is located.
VETERAN AIRCRAFT MARKETER Brant Dahlfors was named regional vice president-Western region, for Bombardier Aerospace, Business Aircraft. With offices in Seattle, Wash., and Newport Beach, Calif., he manages the sales activities for all Bombardier business jets in the Western U.S. For the past five years, Dahlfors served as sales director for the region, with responsibility for sales in Northern California, Oregon, Washington, Alaska and Idaho.
NATIONAL AERONAUTIC ASSOCIATION issued a call for nominations for its Elder Statesman of Aviation Award, Cliff Henderson Award for Achievement, and Katherine&Marjorie Stinson Award for Achievement.
Pursuant to FAA's rulemaking provisions governing the application, processing, and disposition of petitions for exemption (14 CFR Part 11), this notice contains a summary of certain petitions seeking relief from specified requirements of the Federal Aviation Regulations (14 CFR Chapter I), dispositions of certain petitions previously received, and corrections. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities.
Model 400A and 400T Series airplanes (Docket No. 99-NM-372-AD; Amdt. 39-11721; AD 2000-09-12) - requires replacement of temperature switch assemblies of the wing ice protection system with new, improved parts. This amendment is prompted by reports of electrical continuity problems with solder joints on the temperature switches of the wing ice protection system. The actions specified by this AD are intended to prevent detachment or breakage of wires in the temperature switch assemblies of the wing ice protection system.
Model 222, 222B, 222U, and 230 helicopters (Docket No. 99-SW-43-AD; Amdt. 39-11738; AD 2000-10-14) - requires inspecting each flapping bearing to yoke attachment bolt and replacing each bolt that shows thread damage, shank wear, or corrosion pitting with an airworthy bolt. This amendment is prompted by the discovery of a fractured bolt during a post-flight inspection. The actions specified by this AD are intended to prevent a fracture of a bolt, failure of the bearing and yoke interface, and subsequent loss of control of the helicopter.
BOMBARDIER sold three business jets valued at $78 million to Dogus Hava Tasimaciligi A.S. of Istanbul, Turkey. The order, the largest Bombardier has received from a company in Turkey, includes a Global Express, Learjet 60 and Challenger 604. Deliveries of the aircraft will begin in 2001. TAG Aeronautics Ltd., Bombardier's exclusive distributor in the region, facilitated the sale. "Continued market interest in Turkey, in particular, caps many months of work by TAG representatives," Bombardier said.