Federal Aviation Administration's proposal to require new emergency procedures for donning oxygen masks on Learjet 35/36 aircraft is an inappropriate use of airworthiness directives "and could set a bad precedent that would affect all of aviation," the Aircraft Owners and Pilots Association claimed. National Air Transportation Association said that FAA should alter its proposal because it could cause the flight crews to overreact.
Docket No.: 29955 Section of the FAR Affected: 14 CFR 45.21(a), 45.25, and 45.29(a) and (b) Description of Relief Sought/Disposition: To permit Ross to operate his RV-8 aircraft (Registration No. 207RV; Serial No. 80094) displaying three-inch-high nationality and registration markings on the vertical tail surface and 18-inch-high markings on the top of the right wing and the bottom of the left wing instead of the 12-inch-high markings required by the regulation. Denial, May 23, 2000, Exemption No. 7230
CESSNA AIRCRAFT is offering a new Instrument Computer Based Instruction program (I-CBI) through its Cessna Pilot Center flight training network. The multimedia training system follows on to the private pilot CBI program that Cessna introduced two years ago. The I-CBI kit includes 28 interactive CD-ROMs, textbook, Skyhawk pilot information manual, course syllabus, the FAR/AIM on CD, course management module and an IFR flight organizer. King Schools, which partnered with Cessna to develop the private pilot CBI, also developed the instrument program.
HANSEL E. TOOKES, was named chairman of Raytheon Aircraft Co. Tookes, who was elected a Raytheon Company executive vice president in June, has been president and chief executive officer of RAC since January 2000. He joined RAC in September 1999 as president and chief operating officer and the company announced that he would take over as chairman following the planned retirement of Art Wegner.
JAMES McCABE was named chief operating officer of Sermatech International. McCabe will oversee Sermatech's protective coating, turbine component repair and manufacturing businesses. He joined the company in 1991 as treasurer and most recently was chief financial officer of TFX Sermatech.
Model 407 helicopters (Docket No. 2000-SW-24-AD) - proposes to require inspecting the brackets that attach each horizontal stabilizer slat to the stabilizer for a crack and replacing the slat assembly if a crack is found. Installing airworthy segmented slat assemblies would be required prior to flight after Dec. 31, 2000 and would constitute terminating action for the requirements of this AD. This proposal is prompted by an incident in which a slat separated from a helicopter.
Associated Aviation Underwriters, which has been in the aviation insurance business for more than 70 years, is scheduled to be sold to British Aviation Insurance Group Ltd. before the end of September, under an agreement signed July 31 in New York following several months of discussions and due diligence reviews.
Model EMB-120 series airplanes (Docket No. 2000-NM-130-AD) - proposes to require inspections of certain components, and corrective action, if necessary. This action is necessary to prevent deterioration and deformation of the mass-balance weights of the aileron, which could affect the surface balance of the aileron and result in loss of aileron control and consequent reduced controllability of the airplane. This action is intended to address the identified unsafe condition.
Aviation accident investigators and industry leaders late last month reiterated warnings that the trend toward criminalization of aircraft accidents will hinder safety investigations and cause people involved in an accident to "clam up," but one Justice Department attorney disputed those claims, saying "we don't charge mistakes." At a hearing before the House aviation subcommittee, former FAA chief counsel and aviation attorney Kenneth Quinn reiterated his charge that "the increasing criminalization of aviation threatens the post-accident learning process, and, absen
AVIATION DATA SERVICE, INC. named Vernon L. Almond director of sales for the Wichita-based provider of aircraft and engine data. Almond previously was a sales representative for Century Aircraft Instruments of Wichita. Almond succeeds AvData veteran Barney Bayard, who accepted a position outside the aviation industry in Wichita.
NATIONAL BUSINESS AVIATION ASSOCIATION is hosting two meetings this week in the Denver area to discuss items of interest to business and corporate pilots and hear their concerns about regulatory and operational issues. The meetings are scheduled Aug. 2 at 7:30 a.m. at the Paragon Ranch Hangar at Jeffco Airport (BJC) in Broomfield, Colo. and at 11:30 a.m. the same day at the Denver JetCenter Hangar at Centennial Airport (APA) in Englewood, Colo. Persons planning to attend are asked to call June DeFontes at NBAA at (202) 530-0979 or e-mail her at [email protected].
GULFSTREAM AEROSPACE is offering the Sanders AN/ALQ-204 Matadora infrared countermeasures system on its aircraft to protect them from ground- and air-launched infrared-guided missiles. "In certain parts of the world, government, VIP and corporate business aircraft can be vulnerable targets to terrorist organizations equipped with infrared-guided missiles," said Dobie Gilfillan, IRCM program manager for Gulfstream.
BFGOODRICH AEROSPACE was selected by C&D Aerospace to supply emergency evacuation systems for the new Embraer ERJ 170 and ERJ 190 regional aircraft. C&D is the interior and cabin systems supplier to Embraer. BFGoodrich also won the contract to provide wheels and brakes for Embraer's new ERJ 140 regional airliner.
LORI KRANS was appointed director of marketing, plans and proposals for Sextant In-Flight Systems. Krans has 18 years of marketing experience with Sony Corporation of America, most recently as senior marketing manager at Sony Trans Com.
UNIVERSAL AVIONICS SYSTEM CORPORATION won authorization under FAA Technical Standard Order C151a for its Class A terrain awareness and warning system. The TAWS unit provides terrain situational awareness for current and predicted airplane position. The look-ahead capability can be displayed from a map, profile or three-dimensional perspective. The TAWS provides visual and aural warnings with terrain conflict graphics.
FAIRCHILD DORNIER is installing the production equipment to build the 728JET fuselage in a modernized 65,000-square-foot hangar at its Oberpfaffenhofen, Germany plant. A key element in the production process will be a gantry riveting machine manufactured by the German firm, Brotje, which is designed to automate the manufacturing of large fuselage components. The numerically-controlled robot will join skin panel sub-assemblies into upper and lower half shells, which will form the passenger cabin during final assembly.
THE WHITE HOUSE last week nominated David Plavin, president of the Airports Council International - North America, to serve on the Federal Aviation Management Advisory Council. Plavin is the ninth member to be nominated to serve on the MAC, but is the first directly from the airports community. As president of ACI-NA, he represents 150 governing bodies that own and operate more than 400 airports worldwide. Plavin also was a former director of aviation for the Port Authority of New York and New Jersey.
WORLDWIDE unit shipments of business, personal and regional aircraft are on pace to double in less than four years. Worldwide manufacturers reported deliveries of 1,482 aircraft in the first six months of 2000 - just 71 units shy of what manufacturers reported for all of 1996. Dollars wise, U.S. general aviation manufacturers posted then record billings of $3.1 billion in all of 1996. Through the first six months of this year, the U.S. GA market shipped $4.2 billion in new aircraft. See article on Page 48 and chart on Pages 51 and 52.
FAA is seeking nine people to serve on an Aircraft Repair and Maintenance Advisory Committee the agency is establishing. As specified in the AIR-21 FAA reauthorization legislation passed earlier this year (BA, April 10/163), FAA is seeking: three representatives of labor organizations representing aviation mechanics; and one individual each representing: air cargo carriers; passenger air carriers; aircraft repair facilities; aircraft manufacturers; on-demand passenger air carriers/corporate aircraft operations; and regional passenger air carriers.
Eclipse Aviation Corp. announced an eight percent price increase for its Eclipse 500 and presented slightly lower performance parameters for the five/six-place aircraft, but officials say they will deliver a twin-turbofan light jet for a still "compelling" price of well under $1 million.
BOB NEAL was named outside sales representative for Professional Aviation Associates. Neal, who will represent the South Central U.S., formerly served with Austin Avionics and Aurora Avionics.
TOM CHASTAIN, president of Professional Aviation Associates, added the responsibilities of president of Banner Aerospace Aircraft Services (BAAS). BAAS, based in Georgetown, Texas, is an FAA repair station that provides inspection, repair and support for Beech King Air, Cessna Citation, Fairchild Merlin and Metro and Aero Commander aircraft.
BELL HELICOPTER TEXTRON said its KingCobra (AH-1Z) was selected by the government of Turkey to fulfill its attack helicopter requirements. Bell now will enter into negotiations on the specifics of the program and applicable agreements. The initial requirement calls for 50 aircraft at a cost of approximately $1.5 billion, with a possible build-up to 145 aircraft. Bell Helicopter Textron will be the primary sub-contractor on the program, with Tusas Aerospace Industries, Inc. of Ankara acting as prime contractor.
Models PA-31, PA-31-300, PA-31-325, PA-31-350, PA-31P, PA-31T, PA-31T1, PA-31T2, PA-31T3, and PA-31P-350 airplanes (Docket No. 99-CE-29-AD) - proposes to supersede three existing ADs that currently require repetitive inspections and/or modifications of the elevator structure. The proposed AD would: initially retain the inspection and modification requirements that are currently required; add certain other airplane models to the AD applicability; and require a modification at a certain time, as terminating action for the currently required repetitive inspections.