SIKORSKY AIRCRAFT is teaming with a Finnish company in an effort to win a major Scandinavian helicopter contract. Sikorsky signed a Memorandum of Agreement Sept. 14 with Patria Finavitec Oy of Finland, which will perform final assembly, test and completion operations for the Sikorsky S-92 helicopter for the Nordic Standard Helicopter Program.
FAIRCHILD SA226 series and SA227 series airplanes (Docket No. 2000-CE-41-AD; Amdt. 39-11885; AD 2000-17-11) - requires repetitive inspections of the MLG drag brace assembly (consists of both brace and links) for cracks, and requires replacement or rework of any cracked MLG drag brace assembly. This AD is the result of several reports of cracks in the MLG drag brace assemblies on the affected airplanes. Continued airplane operation with such cracks could lead to MLG failure and result in loss of control of the airplane during takeoff or landing operations.
Docket No.: 29271 Section of the FAR Affected: 14 CFR 91.109(a) Description of Relief Sought/Disposition: To permit Kerrick R. Philleo to conduct certain flight instruction to meet recent experience requirements in Beechcraft Bonanza and Beechcraft Debonair airplanes equipped with a functioning throwover control wheel in place of functioning dual controls. Grant, July 18, 2000, Exemption No. 6804A
SAFE PARTS PLUS, INC. was selected as a distributor for Kaiser Electroprecision couplings and other products that service aircraft. Kaiser Electroprecision, Irvine, Calif., produces couplings and related equipment for aircraft lavatory servicing, couplings for pressure re-oiling and rapid disconnect functions. Kaiser also produces secondary flight control actuators, horizontal stabilizer trim actuators, nose wheel steering actuators and throttle pedestal assemblies.
SOCATA Models MS 880B, MS 885, MS 892A-150, MS 892E-150, MS 893A, MS 893E, MS 894A, MS 894E, Rallye 100S, Rallye 150T, Rallye 150ST, Rallye 235C, and Rallye 235E airplanes (Docket No. 2000-CE-34-AD) - proposes to require repetitive inspections, and, if necessary, replacement of the elevator clevis and rudder governor control clevis units that are too thin. The proposed AD is the result of mandatory continuing airworthiness information issued by the airworthiness authority for France.
PRECISION CASTPARTS plans to add about 250 new workers to its PCC Structurals and Wyman-Gordon Castings plants in Portland, Ore. because of "significant increases" in aerospace and industrial gas turbine castings production. "Over the past six months, we have spoken frequently of our improving business conditions," said Chairman William C. McCormick, adding that he foresees a "healthy production picture."
Aerospace industry executives last week mourned the loss of Rep. Herbert Bateman (R-Va.), a senior member of the House Armed Services and Transportation and Infrastructure Committees, who died in his sleep Sept. 11 during a visit to Loudoun County, Va. He was 72. Bateman, a 17-year congressman, chaired the readiness subcommittee and sat on the research and development panel. He announced in January that he wouldn't seek re-election this year partly because he suffered from cancer.
Docket No.: 27821 Section of the FAR Affected: 14 CFR 91.209(a) and (b) Description of Relief Sought/Disposition: To permit CRPD to conduct air operations in support of law enforcement and drug interdiction without illuminating the lighted position and anti-collision aircraft lights required by Sec. 91.209. Grant, May 19, 2000, Exemption No. 6780A
EMBRAER received government approval this month for construction of a new assembly plant. The state government of Sao Paulo, Brazil issued a decree expropriating land for the plant in a citrus-growing region. The plant, to be located in the municipality of Gaviao Peixoto, also will house an aerospace development center and a test airfield for new jet military and civilian aircraft.
SPECIAL METALS CORP. (SMC) will raise prices five to eight percent for orders placed Oct. 1 or after, the company said last week. The price hikes are necessary to cover rising energy, transportation and other miscellaneous costs, in addition to "the need to improve financial performance," SMC said. The company is the largest producer of nickel alloys, with primary manufacturing facilities in New Hartford, N.Y., Huntington, W. Va., and Hereford in the United Kingdom.
Docket No.: 29182. Section of the FAR Affected: 14 CFR 121.434(c)(1)(ii) Description of Relief Sought/Disposition: To permit Continental to substitute a qualified and authorized check airman in place of an FAA inspector to observe a qualifying pilot in command (PIC) while that PIC is performing prescribed duties during at least one flight leg that includes a takeoff and a landing when completing initial or upgrade training as specified in Sec. 121.424. Grant, July 27, 2000, Exemption No. 6798A
Docket No.: 29190 Section of the FAR Affected: 14 CFR 91.109(a) and (b)(3) Description of Relief Sought/Disposition: To permit Craig Roy Bailey to conduct certain flight instruction and simulated instrument flights to meet recent instrument experience requirements in certain Beechcraft airplanes equipped with a functioning throwover control wheel in lieu of functioning dual controls. Grant, May 19, 2000, Exemption No. 6763A
Mercury Air Group's net income plunged by nearly two-thirds last year, largely due to bankruptcies by its customers and resulting bad debt charges, the company said. The Los Angeles-based airline and FBO services provider reported net income of just over $2 million, or 30 cents per share, for the fiscal year ended June 30, compared with earnings of $5.93 million, or 68 cents per share, in the previous fiscal year.
RAYTHEON Beech Model 58 airplanes (Docket No. 2000-CE-42-AD) - proposes to require inspection of the rudder bellcrank interconnect tube for damage; replacement or refinish of the interconnect tube, if necessary; and modification of the floorboard. Four reports of damage to the interconnect tube prompted the proposed action. The actions specified by the proposed AD are intended to correct the wrong use of screws and consequent wear in the pilot/copilot pedal interconnect tube, which could result in loss of rudder control.
FAA completed work this month on a bill to establish uniform safety standards for air tour operators and sent it to the Office of Management and Budget for review. OMB received the national air tour safety standards notice of proposed rulemaking Sept. 8.
AEROSPATIALE Model ATR 42 and ATR 72 series airplanes (Docket No. 99-NM-183-AD; Amdt. 39-11890; AD 2000-18-05) - requires modification of the alerting capability of the anti-icing advisory system to improve crew awareness of icing conditions, replacement of the median wing de-icing boots with extended de-icing boots, and installation of de-icing boots on the metallic wing leading edge. This amendment is prompted by issuance of mandatory continuing airworthiness information by a foreign civil airworthiness authority.
ANOTHER INDICATION that nothing happens quickly in official Washington: nearly four years after Congress passed the Federal Aviation Administration Reauthorization Act of 1996 - which called for creation of a Management Advisory Council to advise the FAA Administrator - the first members of the MAC are scheduled to be sworn in this week at FAA headquarters.
KAMAN Model K-1200 helicopters (Docket No. 2000-SW-32-AD; Amdt. 39-11895; AD 2000-18-10-AD) - requires replacing certain unairworthy sprag clutches with airworthy sprag clutches. This amendment is prompted by two incidents of sprag clutch failure during external load operations. The actions specified in this AD are intended to prevent a malfunctioning transmission clutch, loss of drive to the main rotor system, and subsequent loss of control of the helicopter. FAA estimates that four helicopters will be affected by this AD at a cost of $68,960.
FEDERAL AVIATION ADMINISTRATION plans to allow pilots to make air traffic control slot reservations - when required - via the Internet beginning Sept. 18, the Aircraft Owners and Pilots Association announced. AOPA, which has been pushing FAA to provide more services through the Internet, said FAA agreed to accept Web reservations under the Special Traffic Management Program, which takes effect during events that attract high volumes of aircraft traffic.
ROBERTO QUARTA, chief executive of British holding company BBA Group, will become a partner early next year in Clayton, Dubilier&Rice, the investment banking firm that controls Fairchild Dornier. BBA, which owns the Signature Flight Support chain of fixed-base operations and maintenance facilities, said Quarta will step down as chief executive in March and will serve as deputy chairman until then. In March, BBA said Quarta will assume the role of non-executive chairman of BBA following the company's next annual general meeting.
Model S-76 series helicopters (Docket No. 2000-SW-26-AD; Amdt. 39-11861; AD 2000-11-52) - publishes an amendment adopting an AD previously sent to all known U.S. owners and operators of S-76 series helicopters by individual letters. This AD requires determining the serial number (S/N) of each main rotor blade and removing certain serial-numbered main rotor blades. This AD also requires visually inspecting and replacing, if necessary, other certain serial-numbered main rotor blades.
AT LEAST two other accidents have involved decompression in turboprops, according to Robert E. Breiling Associates of Boca Raton, Fla. On Sept. 25, 1979 the crew of a British-registered King Air 200 said they were going to practice decompression at FL310. No further contact was made and the plane flew for several hours until it ran out of fuel and crashed in France. The cause was determined to be that the crew had donned oxygen masks, but the masks were not properly connected to oxygen. On Jan.
Model 328-100 series airplanes (Docket No. 2000-NM-112-AD) - proposes to supersede an existing AD that currently requires revising the Airplane Flight Manual (AFM) to provide the flight crew with additional information regarding procedures to ensure complete pressurization of the hydraulic lines for the flaps. This action would require revising the existing AFM revision to include a flap system test to be performed prior to the first flight of the day.
OGDEN AVIATION FUELING CO. of Virginia pleaded guilty to dumping spent jet fuel into a waterway at Dulles International Airport, the Justice Department said last week. Ogden, which operated the fuel storage and distribution system at Dulles from 1988 to 1998, agreed to pay a $200,000 penalty and sentencing is set for Nov. 28. The charge resulted from an incident in October 1996. The government said that as part of Ogden's fueling business at Dulles it collected storm water contaminated with jet fuel and stored it in a large tank on-site.
Aviation Partners Boeing, the joint effort between Aviation Partners Inc. and The Boeing Company, last week won supplemental type certificate approval for its blended winglets on the Boeing Business Jet. Approval follows a flight-testing program that began more than two years ago with a proof-of-concept prototype mounted on a production 737-800, the sister aircraft of the BBJ. "This is the first time our blended winglet technology has ever been certified on a large jetliner," said Joe Clark, chief executive of Seattle-based Aviation Partners Inc.